Drywall Installation in Rockville, MD
New walls and ceilings hung, taped, and finished ready for paint — across Rockville, Potomac & Silver Spring.
Finishing a basement, framing a new room, or gutting a space to the studs? NextDayJose hangs and finishes drywall throughout Rockville, Silver Spring, and Bethesda. We measure, hang the board tight to the framing, tape and mud the seams, and sand it flat so it's ready for primer. Locally-owned with 13+ years in the DMV, we do clean work and haul the scrap away.
We handle standard half-inch board, moisture-resistant drywall for baths and basements, and fire-rated board where code calls for it. Doing a bigger project? We coordinate with your finishing level, add crown molding, and can rough in an outlet before the walls close up.
Drywall Installation Projects We Take
- Finished basement walls and ceilings
- New room additions and bump-outs
- Garage conversions to living space
- Moisture-resistant board for baths & basements
- Fire-rated drywall at garage & unit walls
- Full tear-out and re-hang after water damage
Drywall Installation Cost in Silver Spring & Rockville, MD
Drywall installation is usually priced by the square foot or by the sheet, hung and finished. All prices include labor:
| Service | Estimated Cost | Notes |
|---|---|---|
| Hang only (per sheet, 4x8) | $40 – $70 | Board set, not finished |
| Hang & finish (per sq ft) | $1.50 – $3.50 | Taped, mudded, sanded |
| Small room / closet | $400 – $900 | Hung & finished |
| Finished basement (avg) | $3,000 – $8,000 | Walls & ceiling, ready to paint |
| Moisture / fire-rated board add-on | +$0.30 – $0.80/sq ft | Bath, basement, garage |
*Prices are estimates for the Rockville, Silver Spring, Potomac, and greater DMV area. Final cost depends on materials and scope of work. Call for a free estimate — we never charge for quotes.
Drywall in DMV Basements
A huge share of our drywall work is finished basements across Montgomery County — and basements are exactly where the wrong board causes problems. We use moisture-resistant drywall and keep the bottom edge off the slab so a minor water event doesn't wick straight up and grow mold. In older Rockville and Kensington homes we also check for the settling and out-of-plumb framing that makes cheap drywall jobs look wavy.
If your project is tied to an addition or a permitted basement finish, the drywall type and fire separation matter for inspection. We hang to code, leave the right gaps, and can stage the work around your electrical rough-in so nothing gets buried that shouldn't be.
Why Rockville Homeowners Choose NextDayJose
Get a Free Drywall Installation Quote in Rockville
Fill out the form and we'll respond within 30 seconds!