Cabinet Hardware Replacement in Rockville, MD
The fastest way to modernize a kitchen — done right, every pull lines up. New cabinet knobs & pulls across Rockville, Silver Spring & the DMV.
New cabinet hardware is the highest-impact, lowest-cost kitchen update there is — but a kitchen has 25 to 40 pieces, and if they're not all drilled to the same height and spacing, the whole room looks off. NextDayJose replaces kitchen cabinet knobs and pulls using a hardware jig so every door and drawer is identical, plumb, and consistent, for homes across Rockville, Silver Spring, Potomac, and the DMV. We handle the tricky conversions too — knobs to pulls, or new longer pulls that don't match the old holes.
When new pulls don't align with existing bores, we fill, refinish, and re-drill so there are no orphan holes left behind. If your cabinets also need help beyond hardware — doors that won't sit even or hinges that have given out — we can pair this with cabinet door adjustment and soft-close hinges in the same visit. Same hardware skill applies to your bathroom vanity, and for cabinets with broken boxes or drawer slides, see our cabinet & drawer repair.
When to Contact Us
- Refreshing a dated kitchen with new hardware
- Converting knobs to pulls (new hole spacing)
- New pulls don't line up with old holes
- Brand-new cabinets with no holes drilled
- Handles loose, spinning, or stripped out
- Matching hardware across kitchen & baths
Cabinet Hardware Replacement Cost in Silver Spring & Rockville, MD
Pricing is usually per piece, so a whole-kitchen swap is very affordable. All prices include labor:
| Service | Typical Cost Range | Notes |
|---|---|---|
| Install into existing holes | $4 – $8 / piece | Tighten & align, $95 min |
| Drill new holes with jig | $8 – $15 / piece | Consistent across kitchen |
| Convert knobs to pulls (re-bore) | $12 – $22 / piece | Fill old holes, re-drill |
| Fill & refinish orphan holes | +$15 – $40 / hole | Invisible when open |
| Typical full kitchen (30–40 pcs) | $180 – $450 | Whole-kitchen refresh |
*Prices are estimates for the Rockville, Silver Spring, Potomac, and greater DMV area. Final cost depends on materials and scope of work. Request a free estimate — we never charge for quotes.
Real Local Insight from the DMV
Montgomery County is full of 1990s and early-2000s kitchens — Kentlands, Fallsgrove, Montgomery Village, huge stretches of Germantown and Gaithersburg — with honey-oak cabinets that are structurally fine but look thirty years old. Homeowners prepping to sell in the hot DMV market get a startling return from just swapping brass knobs for modern pulls; agents around Rockville and Bethesda recommend it constantly. The one thing that ruins the effect is inconsistent placement, which is precisely what the jig prevents.
Many of these local cabinets are frameless or have thin thermofoil doors that tear out on the back when drilled without a backer, and the drawer fronts are often five-piece MDF that splits if you over-torque a screw. We back every hole and hand-set the final turns so nothing blows out or strips. On the rare solid-wood Potomac kitchen we adjust the bit and feed rate accordingly — knowing the material is half the job here.
Why Rockville Homeowners Choose NextDayJose
Get a Free Cabinet Hardware Quote in Rockville
Fill out the form and we'll respond within 30 seconds!