Vanity Hardware Installation in Rockville, MD
New knobs and pulls transform a vanity — if every hole lines up. We drill them straight and consistent across Rockville & the DMV.
Swapping bathroom vanity hardware is the cheapest facelift there is — until you drill a pull crooked or spaced wrong and now every door has an ugly extra hole. NextDayJose installs and replaces vanity knobs and pulls with a drilling template so every piece is plumb, aligned, and identically placed, for bathrooms across Rockville, Silver Spring, Potomac, and the DMV. Going from knobs (one hole) to pulls (two holes) means new bore spacing, and matching that across a whole vanity by eye is exactly where DIY jobs go wrong.
If your new pulls don't line up with the old holes, we can fill and re-drill so there's no leftover hole showing, and touch up as needed. It's the same hardware craft we bring to kitchen cabinet hardware — the technique is identical, just a different room. Refreshing the whole bath? Add a new mirror, medicine cabinet, or coordinated towel bars so everything matches.
When to Contact Us
- Updating dated vanity knobs or pulls
- Switching from knobs to pulls (new hole spacing)
- New pulls don't line up with existing holes
- Drilling a brand-new vanity with no holes
- Handles are loose, spinning, or stripped
- Matching bathroom and kitchen hardware finishes
Vanity Hardware Installation Cost in Silver Spring & Rockville, MD
Most vanities have just a few doors and drawers, so this is a quick, affordable upgrade. All prices include labor:
| Service | Typical Cost Range | Notes |
|---|---|---|
| Install hardware, existing holes | $4 – $8 / piece | Tighten & align, $75 min |
| Drill new holes with template | $8 – $15 / piece | Straight, consistent bores |
| Convert knobs to pulls (re-bore) | $12 – $22 / piece | New spacing, fill old holes |
| Fill & refinish leftover holes | +$15 – $40 / hole | No orphan holes showing |
| Whole vanity refresh (typical) | $90 – $220 | Doors + drawers, aligned |
*Prices are estimates for the Rockville, Silver Spring, Potomac, and greater DMV area. Final cost depends on materials and scope of work. Request a free estimate — we never charge for quotes.
Real Local Insight from the DMV
The DMV's 1990s–2000s tract bathrooms in Gaithersburg, Germantown, and Clarksburg are full of builder-grade oak or maple vanities with brass knobs that instantly date the whole room. Swapping to a matte black or brushed-nickel pull is the highest-impact $150 you can spend, and it's why we get bundled into so many Montgomery County pre-sale touch-ups. The catch is that going to a longer pull needs a template so all eight or ten pieces land at the same height — do it freehand and the eye catches every wobble.
A lot of local vanities are thermofoil or MDF, not solid wood, and those materials chip and blow out on the back side if you drill without backing the exit hole. We back every bore so there's no tear-out you'd see when the door is open, and on stripped screw holes we plug and re-set rather than just cranking the screw tighter until it spins forever. Same care we'd want in our own homes here in Rockville.
Why Rockville Homeowners Choose NextDayJose
Get a Free Vanity Hardware Quote in Rockville
Fill out the form and we'll respond within 30 seconds!